EzyTile patio pavers simply snap in place, accurately, precisely and securely over practically any hard surface... ready to enjoy in a matter of hours, not days.
Slate Series
• Natural slate bonded to an interlocking plastic base
• Quick and easy snap together installation
• No adhesives, no grout, no special tools required
Choose from the popular Copper Jade or the classic simplicity of traditional sea green or gray slate.
The clip on Edge Reducers as shown below can be used on the outside row of tiles to provide a sloping transition to floor level.
Click on the Copper Jade tile to see the typical color variation that can be expected with this tile.
Sandstone Series
• Natural sandstone bonded to a ceramic tile & attached to an integral interlocking plastic base
• Quick and easy snap together installation
• No adhesives, no grout, no special tools required
The warm brown tones and subtle bands of color of natural sandstone combine perfectly to bring a delightful Tuscan feel to any exterior setting. Ideal for both covered and semi covered external areas where a soft, natural stone look is desired.
To minimize damage by chipping or breakage, the tiles feature a top sandstone layer bonded to a dense ceramic base. A silicone oil is applied which provides a degree of initial water repellency to the tiles.
The clip on Edge Reducers as shown below can be used on the outside row of tiles to provide a sloping transition to floor level.
Click on the Sandstone or Sandstone (Quad) tile to see a larger view with more tiles.
Granite Series
• Natural granite bonded to an interlocking plastic base
• Quick and easy snap together installation
• No adhesives, no grout, no special tools required
For hard wearing, durability, resistance to breakage, and classic good looks, its hard to go past the natural look of granite.
With a hammered slip resistant finish, the EzyTile granite series are a true all rounder for all fully exposed or semi covered situations.
The clip on Edge Reducers as shown below can be used on the outside row of tiles to provide a sloping transition to floor level.
Imitation Stone Series
• Extra strength and thickness porcelain bonded to an interlocking plastic base.
• Quick and easy snap together installation
• No adhesives, no grout, no special tools required
With an attractive mottled, stone like appearance and a fine top layer of silica sand for superior slip resistance, the EzyTile Imitation Stone tile is an ideal choice for exposed exterior patios, balconies and roof tops where the sub-surface is smooth and level and where a stronger tile than our standard porcelain range is required .
The clip on Edge Reducers as shown below can be used on the outside row of tiles to provide a sloping transition to floor level.
Porcelain Series
• Single piece porcelain bonded to an interlocking plastic base.
• Quick and easy snap together installation
• No adhesives, no grout, no special tools required
With a fine top layer of silica sand for superior slip resistance, the EzyTile porcelain series is an ideal choice for exposed exterior patios, balconies and roof tops where the sub-surface is smooth and level.
The clip on Edge Reducers as shown below can be used on the outside row of tiles to provide a sloping transition to floor level.
Pebble & Mosaic Series
• Natural stone pebbles bonded to an interlocking plastic base.
• Quick and easy snap together installation
• No adhesives, no grout, no special tools required
Pebble and Mosaic tiles can either be used on their own or can be combined with any of our other tiles to create attractive feature panels or infill areas. As with all our other tiles, no adhesive is required and no grout is used between the tiles or the pebbles themselves.
If using these tiles in conjunction with our other tiles, the male connecting tabs on the outer perimeter of the pebble/mosaic tiled area should be removed with a sharp knife so the tiles butt against the neighboring tiles rather than interlocking with them. (The interconnecting tabs on our other tiles are slightly different and will not connect directly with these tiles).
Edge Reducers
• Injection molded plastic reducers (transition strips)
• Clip to the edge of the outer row of tiles to provide a smooth, professional, angled transition between the tile and the base surface
• Designed for use with Porcelain, Imitation stone, Slate, Sandstone and Granite tiles (not for Pebble or Mosaic tiles)
Straight reducers |
||
| Supplied as single 11 13/16" long x 3" wide pieces | ||
Corner Reducers |
||
| Supplied as a pair with mitered corners One pair required for each corner |
||
Interlocking Base
| • UV stabilized polyethylene • In-built interlocking tabs and matching connecting sockets on all 4 sides • Engineered to support over one ton of weight • Workable temperature range: -100°F to 200°F (-73°C to 93°C) |
PRINT THIS PAGE
- » Patios
- » Porches
- » Basement Flooring
- » Balcony Decking
- » Roof Decks
- » Upper Level Waterproof Decks
- » Above Ground Pool Decks
- » Resurfacing Existing Wood Decks
See How They Work on:
Plan your deck and estimate the number of tiles you'll need with just a few clicks, using our online deck design tool
» Start designing here
Mosaic stone and Pebble tiles are now available in our EzyTile range which can either be used on their own or inserted amongst our other tiles.




























